KVM - DVI, USB 2.0, Cat 5 ExtenderLAN or 330 feet (100 meters)EL4500 User GuidePowered by
3. Check to see if the USB and Video LEDs are blinking green. If they are not blinking this indicates there is no USB data or Video data. Check the
PROBLEM CAUSE SOLUTIONAll LEDs on Remote Extender unit are off.• The Remote Extender unit isnot receiving power from the Remote Extender DC adapter.1
There is no audio.• The USB CMEDIA PNP Audio device is not selected as the default audio device.1. Check that the CMEDIA device is enumerated on the
13PROBLEM CAUSE SOLUTIONAll LEDs on both the Local Extender unit and Remote Extender unit are on, but the USB device does not operate correctly or is
14Pairing a Local Extender to a Remote ExtenderA Local Extender and Remote Extender comes paired with each other. No additional action is required whe
15SpecificationsRange Connection on a LAN or direct connect up to 330 feet (100 meters) USB device supportHigh-speed devices (480 Mb/s) (USB 2.0)Full s
16Contacting Technical SupportIf you are experiencing problems not referenced in Trouble Shooting, you may contact Technical Support (techsupport@icro
17Pair 2Pair 3Pair 1Pair 41 2 3 4 5 6 7 8 W-G G W-O BL W-BL O W-BR BRPair 2Pair 3Pair 1Pair
Thank you for purchasing the KVM - DVI, Audio, USB 2.0, Cat 5 ExtenderLAN or 330 feet (100 meters)Please read this guide thoroughly.FCC Radio Frequenc
ContentsIntroduction ... 4 Product
IntroductionThe instructions in this guide assume a general knowledge of computer installation procedures, familiarity with cabling requirements, and
CompatibilityThe product is compatible with many graphics cards, Operating Systems, and monitors. However, there is no guarantee that all devices are
The Local ExtenderThe Local Extender connects to the computer using the included DVI and USB cable. Front ViewITEM TYPE DESCRIPTION1 Pair (Button) Res
The Remote ExtenderThe Remote Extender provides DVI output to a monitor, microphone input, headphone output, and three USB Type A ports for standard U
Installation GuideBefore you can install the product, you need to prepare your site:1. Determine where the computer is to be located and set up the
1. Plug one end of the Cat 5 cabling or patch cord (not included) into the Link port (RJ45) on the Local Extender unit.2. Plug the other end of
Kommentare zu diesen Handbüchern